Self Priming Pumps are a type of centrifugal pump that can be located above the suction reservoir without an external priming system. End suction configuration, but has an enlarged case to hold some liquid to support priming. When the liquid to pump is below the level of the pump, it has to have a check valve in the suction, and has to be primed, this is to have that suction pipe filled with water, otherwise it will not pump if air gets to get in that suction.
Self Priming Pumps need no check valve, and can start turning no matter if it has air or not, because the discharge of water goes to a chamber that has some water that is pulled even when the pump is empty, it moves in a closed circuit, making suction to lift the water from the lower level, once the pump eliminates the air from the suction pipe, it pumps water up.
Self-Priming Pumps have no need for external priming or foot valves.
Self-Priming Pumps pump water and relatively thin liquids (won't pump thicker oils). Can pump liquids with or without solids if proper impeller type is chosen. Available in alloys for corrosive or abrasive services.
Self-Priming Pumps have no need for external priming
PumpMan Self Priming Pump Repair Services:
- Onsite troubleshooting
- Removal of Self-Priming Pump from jobsite (If required)
- Inspection, repair or replacement of suction piping
- Complete disassembly and inspection including non-destructive testing and precise measuring.
- Bead blasting and thorough cleaning of all Self-Priming Pump components and parts
- Self-Priming Pump parts fabrication or rebuilt (As necessary)
- Motor analysis
PumpMan can repair, rebuild, redesign, or upgrade your Self-Priming Pump to get it back in service as quick as possible with the reliability that you expect. We stand behind every rebuild or repair with our 100% workmanship guarantee. PumpMan’s Planned Maintenance Programs create peace of mind and system longevity.